2-1
Chapter 2: Preparing to Cut
This chapter describes how to prepare to start the cutting.
PRODUCT SUMMARY
2.1 Preparation of Cutter Plunger
2.2 Attaching a Tool
2.3 Loading Media (Paper)
2.4 Aligning the Push Rollers
2.5 About the Default Screen
2.6 Connecting to the Power
2.7 How to Use Control Panel
2.8 Setting Feeding Method
2.9 Media auto prefeed and cross cut
2.10 Selecting Tool Condition
2.11 Running Cutting Tests
2.12 Displaying Cutting Area
To Next Page
Loading...
