GRAPHTEC CE7000-130AP - Clearing the Buffer Memory

9-4
9.2
Clearing the Buffer Memory
This function allows you to clear all the output data in the plotter's buffer memory.
CAUTION
Do not execute the BUFFER CLEAR function until the operation of the plotter is stopped.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/4) is displayed.
3
Press the [1] key (BUFFER CLEAR).
BUFFER CLEAR screen is displayed.
Supplement
It will return to INTERFACE screen (1/4) without
changing the settings when you press the [ESC]
key (CANCEL).
4
Press the [1] key (YES, CLEAR).
Buffer will be cleared and it will return to default screen.