GRAPHTEC CE7000-130AP - Index

I-1
INDEX
Cutter plunger ................................ 1-2
Cutter Plunger Exchange ...................... 12-6
Cutter plunger nomenclature .................... 2-2
CUTTING DEMO ............................ 13-17
Cutting mat .................................. 1-4
Cutting test ................................. 2-44
D
Daily maintenance ............................ 12-2
DATA DUMP ............................... 13-20
Default screen ............................... 2-26
DIAGNOSTICS ............................. 13-22
Display language setting ....................... 10-2
Display Length Unit Setting. . . . . . . . . . . . . . . . . . . . . 10-3
DISTANCE ADJUST .......................... 7-12
E
Enabling/Disabling the ' : ' and ' ; ' commands ...... 11-5
ENTER .................................... 2-24
Error Messages in GP-GL Command Mode ........ 13-6
Error Messages in HP-GL Command Mode ........ 13-7
ESC ....................................... 2-24
EXPAND .................................... 4-4
F
Fan suction setting ........................... 10-7
Feed Speed for Pre Feed ....................... 8-7
G
Gateway .................................... 9-7
GP-GL command ............................ 11- 4
GP-GL separator .............................. 6-5
GP-GL STEP SIZE ........................... 11-4
Grit roller position guide ................... 1-4, 2-18
Grit rollers ................................... 1-4
H
HP-GL command ............................ 11-7
HP-GL MODEL EMULATED .................... 11-7
HP-GL separator .............................. 6-6
I
IF .........................................2-27
I/F (LAN) .................................... 9-5
Initial Setting ................................ A-14
Installation space ............................. VII
Interface .................................... 9-2
IP address ................................... 9-7
Sign
1, 2, 3, 4 .................................... 2-25
A
About the Default Screen ...................... 2-22
Accessories .................................. 1-2
AC line inlet .................................. 1-5
Adjusting the blade length ....................... 2-4
Adjustment for Cutting Out ..................... 2-45
Adjustment of Offset .......................... 2-45
Adjustment when using plotting pen .............. 2-45
Adjust the blade length manually ................ 2-43
ADV. ...................................... 2-27
Aligning the push roller ........................ 2-18
Angle control ................................ 7-10
AREA ...................................... 2-27
ARMS Error Messages ........................ 13-9
Attaching a pen ............................... 2-7
Attaching a tool ............................... 2-5
Automatic Pre Feed ........................ 8-4, 8-6
AXIS ...................................... 2-27
Axis adjustment ............................... 5-2
B
Basket ...................................... 1-5
Beep setting ................................ 10-8
Blade application and features ................... 2-4
Blade Manual ................................ 1-2
C
Change the cutting condition .................... 3-6
Changing the hold-down force .................. 2-20
CIRCLE RESOLUTION ........................ 11-8
COND/TEST ........................... 2-26, 2-28
Conrm the Cutting Data ..................... 13-19
Connecting to the Power ....................... 2-23
Continuously move manually .................... 3-3
Control panel ................................. 1-4
Control Panel ................................ 2-24
Copy ...................................... 4 -11
COPY ..................................... 2-24
Cross cut .............................. 2-31, 7-25
CROSS CUT ................................ 2-24
Cross Cut Force ............................. 4-18
Cross Cut Settings ........................... 6-10
Cut demo pattern ........................... 13-17
Cutter blade ................................. 12-3
Cutter blade adjustment magnier ................ 1-2
Cutter blades ................................. 1-2