2-26
Default screen (Ready Screen): READY
The condition number (Cut Condition) that has been set is displayed.
Supplement
•
In this manual, this screen is referred as READY screen or READY status.
•
In this READY status, you can set the cutting and communication conditions by pressing [PAUSE/MENU] or [COND/TEST] key.
Screen to set the corresponding conditions is displayed when the [PAUSE/MENU] key or [COND/TEST] key are
pressed.
MENU screen CONDITION setting screen
[PAUSE/MENU]
It will return to default screen
when [PAUSE/MENU] key
is pressed while displaying
MENU screen.
[COND/TEST]
It will return to default screen
when [COND/TEST] key is
pressed while displaying
CONDITION setting screen.
Page number is displayed in the upper right corner of the screen if there are too many settings or selection that
will need multiple pages to display.
Press the POSITION ( ) keys to move to different page.
[3] key
POSITION ( ) keys
Page number
Page number
Example of moving page and operation button
To Next Page
Loading...
