6-12
6.6
S
etting Rear Margin
During timeout or when making cross cut with separator setting, the media is cross-cut t at the position where the
margin value set here is added to the maximum value of + X plotted.
Feed direction of media
Rear position plotted
Cross Cut position
Value of rear margin (+X)
Reference
This setting will be saved even if the power is shut off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
To Next Page
Loading...
