2-27
Icon of the corresponding operation button is displayed in the screen to change the setting values.
Example of screen to change the settings value
Increase or decrease the setting
value using POSITION (
)
keys.
Select the change unit by
[SLOW] key.
Select the setting by number
keys (1, 2, 3, 4) or POSITION (
) keys.
Contents of Operation from MENU Screen
MENU screen
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key are as
following:
[1] (TOOL) : Set the setting for the operation of the tool.
[2] (AXIS) : Perform settings and operations related to alignment of tool and media.
[3] (AREA) : Set the settings for area, magnication, rotation, reverse, etc., of the cutting.
[4] (MEDIA) : Set the setting of the condition for the media.
[ ] (IF) : Set the settings of the condition for the interfacing with the computer.
[ ] (ADV.) : Set the conditions for the basic operation of the cutting plotter, such as display language,
unit of the measurements and sensor.
[
] (TEST) : Does the operation necessary for maintenance, such as self diagnostic test or printout of
the condition settings list.
[ ] (MEM.) : Perform the operation necessary for output from USB memory.
[PAUSE/MENU] : MENU screen will be closed and return to default screen.
[SLOW] : Displays the position key screen. When media is set, the tool point can be moved
See the "Menu Tree" in the Appendix A.4 for list of the descriptions about each settings.
To Next Page
Loading...
