GRAPHTEC CE7000-130AP - Setting Paper Ready Time

4-8
Supplement
It will return to MEDIA SETTING screen (3/3)
without changing the settings when you press
the [ESC] key (CANCEL).
6
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to MEDIA SETTING screen
(1/3).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Setting paper Ready time
This function sets the time the paper/media is acclimated to the operating environment after being pulled off the
paper roll to minimize media expansion or contraction, and prevent it from adversely effecting cutting or plotting.
After the initial feed is complete, the paper will be fed backwards to half the preset feed length and exposed for
the set amount of time.
This function is available when the Initial Feed or if Panel Cutting is ON.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
3
Press the POSITION ( ) key.
MEDIA SETTING screen (3/3) is displayed.