GRAPHTEC CE7000-130AP - Page 114

6-4
Supplement
•
You can set 0, 1, 2, 3, 5, 10, 20, 30, 60 or 120
(sec.).
•
If 0 sec. is set, crosscut due to timeout is not
performed.
5
Press the POSITION ( ) keys and increase or decrease the
setting value.
Supplement
It will return to INTERFACE screen (4/4) without
changing the settings when you press the [ESC]
key (CANCEL).
6
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to INTERFACE screen (4/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.