GRAPHTEC CE7000-130AP - Page 177

9-9
Supplement
When you press the [ ] key on the NETWORK
(LAN) setting screen, the Mac address is
displayed.
13
Conrm the setting and press the [ESC] key (PREVIOUS).
It will return to NETWORK (LAN) setting screen.
Supplement
It will return to INTERFACE screen (2/4) without
changing the settings when you press the [ESC]
key (CANCEL).
14
Conrm the setting and press the [ENTER] key (SET).
When the setting is changed, the plotter will be reset and default screen
will be displayed.