13-16
6
Conrm that the pen tool is set.
CAUTION
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
7
Conrm that operation area of tool and media is safe.
Supplement
It will return to TEST screen without printing by
pressing the [ESC] key (CANCEL SELF TEST).
8
Press the [1] key (DONE).
Plotting of the test pattern starts.
Supplement
It will keep on printing until the power is turned
off once the printing is started by pressing the [1]
key (DONE).
9
Turn the power off to stop the printing.
To Next Page
Loading...
