A-15
Menu items Setting item Initial value
TOOL
SETTING
(Condition)
CONDITION 1 Condition No. Condition No. 1
TOOL PEN
SPEED 30
FORCE 12
ACCELERATION 2
TANGENTIAL MODE OFF
OVERCUT (START) 0.000
OVERCUT (END) 0.000
DISTANCE ADJUST OFF
INITIAL DOWN FORCE 0
CUT LINE PATTERN OFF
CONDITION 2 Condition No. Condition No. 2
TOOL CB09U
SPEED/FORCE/ACCELERATION 30/8/2
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
5
CONDITION 3 Condition No. Condition No. 3
TOOL CB09U
SPEED/FORCE/ACCELERATION 30/14/2
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
3
CONDITION 4 Condition No. Condition No. 4
TOOL CB09U
SPEED/FORCE/ACCELERATION 20/6/2
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
1
CONDITION 5 Condition No. Condition No. 5
TOOL CB09U
SPEED/FORCE/ACCELERATION 20/8/2
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
4
CONDITION 6 Condition No. Condition No. 6
TOOL CB15U
SPEED/FORCE/ACCELERATION 30/16/2
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
3
CONDITION 7 Condition No. Condition No. 7
TOOL CB15U
SPEED/FORCE/ACCELERATION 30/12/1
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
3
CONDITION 8 Condition No. Condition No. 8
TOOL CB09U
SPEED/FORCE/ACCELERATION 30/8/2
Same as Condition No. 1 from TANGENTIAL
MODE to INITIAL DOWN FORCE
Same as Condition No. 1
CUT LINE PATTERN
USER
* Setting items and initial values may be changed.
To Next Page
Loading...
