FC4200-UM-251-03-9370 23
REPLACEMENT PROCEDURES
6.13 Adjusting Y Belt Tension
Move the Y Slider toward the upper stopper.
Press the rail-side belt at the middle part of the Y Rail, and at the position where the belt is in contact with
the Y Rail, adjust the Y belt tension to the following values:
FC4200-50: 600 ± 20 gf
FC4200-60 / FC4210-60: 450 ± 20 gf
Apply suitable quantity of the silicon grease to the Y belt when you replace to new one.
To Next Page
Loading...
