GRAPHTEC FC4200-50 - Cutter Pen Plunger Assembly and Components; Cutter Pen Plunger Structure Explained

2 – 2
2.2 Nomenclature of Cutter Pens
CAUTION
When handling cutter blades, be careful to avoid cutting your fingers or other parts of
your body.
With this plotter, the cutter pen is mounted into its corresponding cutter pen plunger for use. There are two
types of cutter pen plungers available, which vary according to the diameter of the blade to be mounted (the
φ 1.5-mm plunger is provided as a standard accessory). Be sure to mount the cutter in a cutter pen plunger
that is compatible with the diameter of the cutter blade.
Structure of the Cutter Pen Plunger
Plunger cap
PlungerCutter blade
Blade length adjustment dial
Blue dial : for 0.9-mm blades
Red dial : for 1.5-mm blades
φ
φ