GRAPHTEC FC4200-50 - Media Securing Methods for FC4200 Models; Securing Media on FC4200-50 (Electrostatic); Securing Media on FC4200-60 (Polyvinyl)

3 – 7
For the FC4200-60 Model (with a polyvinyl writing panel)
(2) Secure the medium to the writing panel by using tape or its equivalent to tape down areas of the
medium that will not be cut or plotted.
(3) Return the pen carriage to its original position by pressing the key once more.
CAUTION
If an edge of the loaded medium comes loose, secure it with drafting tape or a similar means. The
cutter blade or pen will break if its tip gets caught on a loose edge of the medium.