GRAPHTEC FC4200-50 - ROTATE Mode Behavior and Setting Persistence; ROTATE Mode Activation and Retention

6 – 5
(5) The currently selected setting is indicated by the asterisk (*) symbol.
To enable the ROTATE mode, press the
F2
(ON) key.
To disable the ROTATE mode, press the
F4
(OFF) key.
(6) When the displayed setting is satisfactory, press the ENTER key to register your setting.
(7) Press the PAUSE key to return the plotter to READY status.
NOTE
Your ROTATE setting will be retained in the plotter’s RAM even while the plotter is turned off.