GW Instek APS-7000 Series - Preset Settings; Save Preset Settings to Local Memory

APS-7000 Series User Manual
100
Preset Settings
 Save Presets to Local Memory → from page 100
 Recall Presets to Local Memory → from page 101
 Manage Preset Settings → from page 102
Save Preset Settings to Local Memory
Up to 10 preset settings can be saved to internal memory.
Steps
1. Press Preset and then hold
a number key (0~9) to save
the present settings to the
corresponding memory
number.
Preset
+
0
~
9
(hold)
Presets
M0 ~ M9
2. Press the Preset key again to exit from the
preset mode.
Example
For example, pressing Preset & holding 1 will
save the present settings to memory slot 1
(saved to M1).
Note
The preset key will become green when active. A
beep will be heard (Buzzer set to ON) and a
message will displayed when the settings are
saved.