GW Instek APS-7000 Series - Load Preset Settings to Local Memory

OPERATION
101
Load Preset Settings to Local Memory
Any of the 10 preset settings can be recalled from internal memory.
Steps
1. Press Preset and press a
number key(0~9) to load
the corresponding
memory number.
Preset
+
0
~
9
Presets
M0 ~ M9
2. Press the Preset key again to exit from the
preset mode.
Example
For example, pressing Preset + 1 will recall the
saved settings from memory slot 1 (recalled
from M1).
Note
The preset key will become green when active. A
beep will be heard and a message will be displayed
when the settings are recalled.