OPERATION
135
Manage Sequence Settings
Sequence settings can be easily saved to or from a USB flash drive
using the Save/Recall Files utility in the Menu system. Files can
also be deleted from local memory using the utility.
When files are saved to USB they are saved in
the following format:
seqX.seq, where X is the memory number
0 ~ 9 (SEQ0 ~ SEQ9). The files are saved to
USB:/gw.
When files are recalled from USB, files must be
recalled from the same memory number. For
example, the file seq0.seq can only be recalled
to memory number SEQ0. The files can only be
recalled from the USB:/gw directory.
1. Press the Menu key. The Menu
settings will appear on the
display.
2. Use the scroll wheel to go to item 12,
Save/Recall Files and press Enter.
3. Go to the Type setting using the scroll wheel
and press Enter. Select SEQUENCE and press
Enter to confirm.
4. Go to the Action setting and choose the file
operation and then press Enter.
Saves the selected sequence
memory from the local memory
to a USB flash drive.
Loads the sequence memory
from a USB flash drive to the
selected local memory.
To Next Page
Loading...
Need help?
General
