EasyManua.ls Logo

GW Instek APS-7000 Series - Installing Optional Software Modules

GW Instek APS-7000 Series
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
43
Installing Optional Software Modules
Background
The APS-003 and APS-004 are optional software
modules that upgrade the voltage limit and
frequency limit to 600Vrms and 1000Hz,
respectively. Like the firmware, the software
modules can be upgraded using the USB A port
on the front panel. See your local distributor or
GW Instek to purchase these options.
The APS-003 and APS-004 software module license
keys have been updated and there are now two
license key file formats in use:
- The old license keys were tied to the serial
number of the APS-7000 unit. The license key
files used XXXXXX.lis formatting, where
XXXXXX was the serial number of the unit the
license key is intended for.
- The new license keys are no longer tied to
serial numbers. These new license key files use
XXXXXX.lic formatting (APS003.lic &
APS004.lic). The new license keys can be
exported and transferred to different units.
The old and new license keys are to be used with
the following equipments and restrictions:
- Old license key (*.lis): can only be used with
the APS-7050 and the APS-7100 with a
firmware version below V1.08.
- New license key (*.lic): APS-7050 and APS-
7100 with a V1.08 firmware version or above;
any APS-7200; any APS-7300.
Note
To upgrade APS-003 or APS-004, it is recommended to

Table of Contents

Other manuals for GW Instek APS-7000 Series

Related product manuals