Name: GW Instek APS-7000 Series
Brand: GW Instek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

APS-7000 Series User Manual

SCPI Emulation

The SCPI Emulation setting supports both GW Instek as well as

EXTECH SCPI remote commands. When set to EXTECH, the SCPI

Emulation setting allows the APS-7000 to be a drop-in replacement

for the EXTECH 6700 series by emulating the remote commands of

the EXTECH units.

Steps

1. Press the Menu key. The Menu

setting will appear on the display.

2. Use the scroll wheel to go to item 4, MISC

Configuration and press Enter.

3. Go to the SCPI Emulation setting using the

scroll wheel and press Enter. Choose the SCPI

emulation mode and press Enter again to

confirm.

SCPI Emulation

GW, EXTECH, N/A

Exit

4. Press Exit[F4] to exit from the

MISC Configuration settings.

Example

Settings

Other manuals for GW Instek APS-7000 Series

Questions and Answers:

Need help?

Do you have a question about the GW Instek APS-7000 Series and is the answer not in the manual?

General