GW Instek APS-7000 Series User Manual

OPERATION
33
Power Up
Steps
1. Socket type (APS-7050):
Connect the power cord
to the rear panel socket.
Input Power Terminal
(APS-7100, 7200 & 7300):
Connect the power cord to
the input power terminals.
APS-7200 & 7300,
see page 22,
APS-7100,
see page 28.
2. Press the POWER key. The splash screen will
appear momentarily before the continuous
mode screen appears with the settings loaded.
CAUTION
The power supply takes around 10 seconds to fully
turn on and shutdown.
Do not turn the power on and off quickly.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English