GW Instek APS-7000 Series - Installing the Optional Hardware Modules

OPERATION
41
Installing the Optional Hardware Modules
Background
There are a number of optional modules that
can be installed for remote control.
Optional Modules
APS-001
GPIB Interface card
APS-002
RS-232/USB CDC interface card
APS-007
RS-232 interface card
WARNING
Dangerous voltages. Ensure that the power to the
instrument is disabled before handling the power
supply output terminals. Failing to do so may lead
to electric shock.
CAUTION
Ensure the power is off before installing any of the
optional modules.
Installation
1. Turn off the power
switch.
1
2. Unscrew the two screws holding the options
panel plate.
2
APS-7100 shown