GW Instek APS-7000 Series User Manual

APS-7000 Series User Manual
60
Basic Operation
This section describes the basic operations required to operate the
power supply.
 Setting the Voltage Range → from page 60
 Setting the Voltage Limit → from page 61
 Setting the Output Voltage → from page 62
 Setting the Frequency Limit → page 64
 Setting the Output Frequency → page 65
 Setting the Peak Current Limit → from page 66
 Setting the Current RMS Level → from page 68
 Setting the On/Off Phase → from page 73
 Clearing the Alarm → from page 74
 Setting the Display mode → from page 75
 Panel lock → from page 77
 Turning the Output on/off → from page 78
 Using the remote sense (APS-7200, APS-7300) → from page 79
Before operating the power supply, please see the Getting Started
chapter, page 8.
Setting the Voltage Range
Background
The Range setting determines the general outlet
voltage range. The ranges available correspond
to common mains output voltage standards.
Steps
1. Press Range to access the Range
menu.
Range

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English