GW Instek APS-7000 Series User Manual

APS-7000 Series User Manual
90
Power ON Output
The Power ON Output setting allows you to have the output turn
on automatically after startup. The settings that are loaded are the
last settings that were present in the standard mode before the unit
was turned off last.
Steps
1. Press the Menu key. The Menu
setting will appear on the display.
Menu
2. Use the scroll wheel to go to item 4, MISC
Configuration and press Enter.
3. Go to the Power ON Output setting using the
scroll wheel and press Enter. Select a setting
and press Enter to confirm.
ON
Set Output ON.
OFF
Set Output OFF.
SEQ
Execute the sequence that was
loaded before the unit was last
turned off.
SIM
Execute the simulation that was
loaded before the unit was last
turned off.
PROG
Execute the program that was
loaded before the unit was last
turned off.
Exit
4. Press Exit[F4] to exit from the
MISC Configuration settings.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English