APS-7000 Series User Manual
44
upgrade the software version to the latest one.
For software, please contact GW or local distributors.
OLD LICENCE KEY INSTALLATION (XXXXXX.LIS format)
This installation guide only applies to APS-7050
and APS-7100 equipments with a firmware version
below V1.08.
These options require your serial number. The
older license keys are not longer available for
purchase.
The serial number on the APS unit must match the
XXXXXXX.lis filename, or the upgrade will fail.
See page 55 for instructions on how to view your
serial number
1. Insert the USB flash drive into the USB port on
front panel of the APS-7000.
The USB drive should include the
XXXXXX.lis file in a directory named
“gw”(USB\gw:).
2. Press the Menu key. The Menu
setting will appear on the display.
3. Use the scroll wheel to go to item 11, Special
Function and press Enter.
4. Key in the password when prompted and then
press Enter.
The password is “5004”.
5. Go to Item 5, Add New Module and press Enter.
To Next Page
Loading...
Need help?
General
