GW Instek APS-7000 Series User Manual

OPERATION
125
3. The test will continue to run until the last
repeat step has run, Stop[F4] is pressed or the
output is turned off*. When the test has
finished/stopped, the screen will return to the
original settings screen.
* If the OFF-phase has been set, the output will
continue until the OFF-phase setting is
satisfied.
Hold Test
To pause the test mid-way, press Hold[F3].
Continue Test
To continue a paused test, press Conti[F3].

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English