GW Instek APS-7000 Series User Manual

APS-7000 Series User Manual
156
Note
The RS-232/USB (APS-002) or RS-232 (APS-007)
must first be installed before the RS-232 interface
can be used for remote control. Please see page 41
for installation details.
Steps
1. Connect the RS-232C cable from
the PC to the rear panel RS-232
port.
2. Press the Menu key. The Menu
setting will appear on the display.
Menu
3. Use the scroll wheel to go to item 7, Serial Port
and press Enter.
4. Go to the Function Active setting and turn the
serial port connection on.
Function Active
ON, OFF
5. Set the remaining serial port settings.
Baud rate
1200, 2400, 4800,
9600(default), 19200, 38400,
57600, 115200,
Data bits
7, 8(default)
Parity
None(default), odd, even
Stop bits
1(default),2
Serial port configuration

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English