APS-7000 Series User Manual
176
The display shows “waiting for 10secs” message.
A protection function is likely in force, check the DUT settings.
The display shows “OCP” message.
OCP message be occurred that is mean over the specification of
APS-7000 series.
Even set Irms is equal to 0.
Purchasing more higher power AC Source, please.
The display shows “Remote Sense Error” message.
Remote Sense Error message be occurred that is mean remote sense
connection has mistake. Double check connection, please.
For more information, contact your local dealer or GWInstek at
www.gwinstek.com / marketing@goodwill.com.tw.
To Next Page
Loading...
