GW Instek APS-7000 Series User Manual

OPERATION
29
APS-7100
3
2
4. Remove the AC
power cord wires.
4
CAUTION
The power line inputs for the APS-7100 are on the
outer cluster of terminals.
The terminals to the inner of the panel are the rear
panel outputs.
Installation
1. Connect the AC power cord wires to the AC
input terminals.
 White/Blue  Neutral (N)
 Green/Green-yellowGND ( )
 Black/Brown  Line (L)

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English