H3C S5100-SI

1-38
To do… Use the command… Remarks
Clear statistics of the packets
matching a specific ACL rule
reset traffic-statistic
inbound acl-rule
Optional
2) Configuring traffic accounting for a VLAN
Follow these steps to collect/clear statistics about the incoming ACL matching packets in a
VLAN:
To do… Use the command… Remarks
Enter system view
system-view
—
Collect statistics about
incoming ACL matching
packets
traffic-statistic vlan vlan-id
inbound acl-rule
Required
Clear statistics about the
packets matching a specific
ACL rule
reset traffic-statistic vlan
vlan-id inbound acl-rule
Optional
3) Configuring traffic accounting for a port group
Follow these steps to collect/clear statistics about incoming ACL matching packets in a port
group:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter port group view
port-group group-id
—
Collect statistics about ACL
matching packets
traffic-statistic inbound
acl-rule
Required
By default, traffic
accounting is disabled.
Clear statistics about ACL
matching packets
reset traffic-statistic
inbound acl-rule
Optional
4) Configuring traffic accounting for a port
Follow these steps to collect/clear statistics about incoming ACL matching packets on a
port:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Collect statistics about
incoming ACL matching
packets
traffic-statistic inbound acl-rule
Required