2-14
Operation Command Remarks
port hybrid vlan vlan-id-list
{ tagged | untagged }
Specify the VLANs to be
allowed to pass the Ethernet
port
port trunk permit vlan vlan-list
Required
The multicast VLAN defined on
the Layer 2 switch must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN
if the port type is hybrid.
Table 2-20 Configure multicast VLAN on the Layer 2 switch
Operation Command Remarks
Enter system view
system-view
—
Enable IGMP Snooping
igmp-snooping enable
—
Enter VLAN view
vlan vlan-id
—
Enable IGMP Snooping
igmp-snooping enable
Required
Enable multicast VLAN
service-type multicast
Required
Return to system view
quit
—
Enter Ethernet port view for the
Layer 3 switch
interface interface-type
interface-number
—
Define the port as a trunk or
hybrid port
port link-type { trunk |
hybrid }
Required
port hybrid vlan vlan-list
{ tagged | untagged }
Specify the VLANs to be
allowed to pass the Ethernet
port
port trunk permit vlan vlan-list
Required
The multicast VLAN must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN
if the port type is hybrid.
Enter Ethernet port view for a
user device
interface interface-type
interface-number
—
Define the port as a hybrid port
port link-type hybrid
Required
Specify the VLANs to be
allowed to pass the port
port hybrid vlan vlan-id-list
{ tagged | untagged }
Required
The multicast VLAN must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN.