H3C S5500-EI - Page 203

184
Task Command Remarks
Display the information of unicast
routes used by PIM.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
claimed-route [ source-address ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the number of PIM control
messages.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
control-message counters
[ message-type { probe | register |
register-stop } | [ interface
interface-type interface-number |
message-type { assert | bsr | crp |
graft | graft-ack | hello |
join-prune | state-refresh } ] * ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the DF information of
BIDIR-PIM.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
df-info [ rp-address ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display the information about
unacknowledged PIM-DM graft
messages.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
grafts [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the PIM information on an
interface or all interfaces.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
interface [ interface-type
interface-number ] [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the information of
join/prune messages to send.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
join-prune mode { sm [ flags
flag-value ] | ssm } [ interface
interface-type interface-number |
neighbor neighbor-address ] *
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display PIM neighboring
information.
display pim [ all-instance |
vpn-instance vpn-instance-name ]
neighbor [ interface interface-type
interface-number |
neighbor-address | verbose ] * [ |
{ begin | exclude | include }
regular-expression ]
Available in any view