H3C S5500-EI User Manual

57
{ If PIM is enabled, the switch deletes only its dynamic member ports but not its dynamic router
ports.
NOTE:
On a switch with Layer-3 multicast routing enabled, use the display igmp group port-info command to
display Layer-2 port information.
4. If PIM is disabled on the switch, one of the following occurs:
{ If IGMP is disabled, the switch deletes all its dynamic router ports.
{ If IGMP is enabled, the switch maintains all its dynamic member ports and dynamic router
ports.

H3C S5500-EI Specifications

General

Brand	H3C
Model	S5500-EI
Category	Switch
Language	English