User Manual
Operation and Management
Page 4-84 (Rev. 4.1/ SW v1.60/ December 2006)
4.2.6.2. VBI 1 and VBI 2
The VBI 1 (and VBI 2 in dual decoder IRD’s) Menu contains all VBI (Vertical
Blanking Interval) parameters that are available through the IRD.
To access the VBI 1 and VBI 2 Menus in the front panel control interface go to
Configuration
Æ
Video
Æ
Vbi1 (or Vbi2).
The following figure illustrates the VBI configuration menu:
Vbi 1 1-2-4-2
1 CC (Close Captioning)
2 AMOL (Automated Measurements Of Line-ups)
3 TVG (TV Guide)
4 VITS (Vertical Interval Test Signals)
5 VITC (Vertical Interval Time Code)
6 WSS (Wide Screen Signaling)
7 VI (Video Index)
8 TTX (Teletext-EBU)
9 VPS (Video Programme System)
10 SMC (Sound Mode Control)
11 M422 (Monochrome 4:2:2)
To Next Page
Loading...
