User Manual
Operation and Management
Page 4-6 (Rev. 4.1/ SW v1.60/ December 2006)
FEC RATE
The FEC Rate parameter sets the Forward error correction rate value. The FEC
parameter can be acquired from the satellite transponder information or can be
set to automatic. When in Automatic mode, the PVR 6000 device tries all FEC
rates until locking the rate to the transport stream.
FEC Rate
1 AUTOMATIC
2{ 1/2
3{ 2/3
4{ 3/4
5{ 5/6
6{ 7/8
The available options are:
• Automatic • 3/4
• 1/2 • 5/6
• 2/3 • 7/8
NOTE
If the specific Viterbi rate is not provided, selecting the Automatic option enables
the PVR 6000 to automatically detect the Viterbi rate.
To Next Page
Loading...
