Hi-Target HTS-420R - Page 100

Total Station Manual
- 99 -
point is in memory, if
exist, then press
[F4](OK) to be
selected for
calculating; if not
exist, then need to
input or measure the
point.
[F4](OK)
[Find Pt.] 1/3
1 Station
View
Coord.
Job OK
1 Meas. PT
1 Fix Pt.
D: Press [F2] (Coord.)
to input a point that
not exist in memory.
[F2](Coord.)
+
Input
Coord.
+
[F4](OK)
D: Input the point through keyboard.
[Input Coord.]
Job : DEFAULT
Pt. :
X : 0.000 m
Y : 0.000 m
Z : 0.000 m
Back
OK
DEFAULT
○
4 Set other target
point as described
above four ways.
The area result will be
calculated and
showed at “Area”
field automatically
when there are more
than 3 target points
be set in application.
ALL
[Area]
EDM Result ↓
Pt. ：
T.H. ： 1.500 m
； 12.256 m
PT Count： 3
Area ： 12.362 sqm
4
1
○
5 Press [F4] twice,
then press [F3] (Dec
PT) to undo selection
or measurement of
the previous point.
[F4]
+
[F4]
+
[F3](Dec
PT)
List
[Area]
Coord. Dec PT ∣←
Pt. ：
T.H. ： 1.500 m
：
PT Count： 2
Area ： 0.000 sqm
1
1