Hi-Target HTS-420R - Page 99

Total Station Manual
- 98 -
○
2 After finishing the
pre-settings (know
more details at the
beginning of chapter
5), press [F4] to start
Area app.
[F4]
or
[4]
F1
[Area]
F2 F3 F4
偏置模式 : 偏置模式 :
[*] F1 Set Job (1)
[*] F2 Set STA (2)
[*] F3 Set B.S. (3)
F4 Start (4)
○
3 There are four
ways to get target
point for Area
calculation.
A: Input the name of
target point in“Pt.”
field and input prism
height in “T.H.” field
in [Area] screen, then
aim the prism and
press [F1] (ALL) or
[F1] (DIST) + [F2]
(REC) to measuring
and saving the target
point for area
calculation.
Input point
name and
prism
height
+
[F1]
or
[F1]
+
[F2]
A: Get the target point by measure.
ALL
[Area]
EDM Result ↓
Pt. ：
T.H. ： 1.500 m
：
PT Count： 0
Area ： 0.000 sqm
1
1
DIST REC Find ↓
List Coord. Dec PT |←
B: Press [F4] twice
then press [F1](List)
in [Area] screen, use
the key [▲]\[▼] to
select the point in the
point list for traverse
calculation, then
press [F4](OK) to be
selected.
[F4]
+
[F4]
+
[F1](List)
+
[F4](OK)
B: Select the point by list in the memery.
[Find Pt.] 1/50
DEFAULT Station
View
Coord.
Job OK
STN1 Station
200007 Meas. PT
200008 Meas. PT
100 Fix Pt.
C: Input the name of
known point and
press [F3](Find) to
find whether the
Input name
+
[F3](Find)
+
C: Input the name of the point and find
whether it is in memory.