Hi-Target HTS-420R - Page 110

Total Station Manual
- 109 -
B: Press [F1](List) in
[Traverse] screen,
use the key [▲]\[▼]
to select a Known
point in the point list
for inverse
calculation, then
press [F4](OK) to be
done.
[F1](List)
+
[F4](OK)
B: Select the point by list in the
instrucment.
[Find Pt.] 1/50
DEFAULT Station
View
Coord.
Job OK
STN1 Station
200007 Meas. PT
200008 Meas. PT
100 Fix Pt.
C: Input the name of
known point and
press [F3](Find) to
find whether the
point is in memory, if
exist, then press
[F4](OK) to be
selected for
calculating; if not
exist, then need to
input or measure the
point.
Input name
+
[F3](Find)
+
[F4](OK)
C: Input the name of the point and find
whether it is in memory.
[Find Pt.] 1/3
1 Station
View
Coord.
Job OK
1 Meas. PT
1 Fix Pt.
D: Press [F2](Coord.)
to input a known
point that not exist
in memory.
[F2](Coord.)
+
Input Coord.
+
[F4](OK)
D: Input the point through keyboard.
[Input Coord.]
Job : DEFAULT
Pt. :
X : 0.000 m
Y : 0.000 m
Z : 0.000 m
Back
OK
DEFAULT
○
3 After setting the
first known point
then use [▼]\[▲]
move the focus to
“To” field to set the
second known point,
then press
[F2](Result) to
[▲]\[▼]
+
[F2]
Meas.
[Inverse]
Result Find ↓
偏置模式 :
PT7
Input data!
From ： PT6
To ：