Hi-Target HTS-420R - Page 49

Total Station Manual
- 48 -
○
3 Selcet the fixpoint and
input the height of Prism.
The numbers of
measured fixpoints are
displayed in the top right
corner.
There are 3 methods to
selecting fixpoint.
A：Press [F4] to enter the
second page of soft key
and press [F2](List) .In the
dialog of [Find Pt.], by
pressing [▲] or [▼] to
select the fixpoints to
call.
[F4]
+
[F2]
+
[F4]
ALL
[Height Transfer] 1
DIST REC ↓
偏置模式 :
Select target and meas.!
Pt. ： Pt.1
： m
T.H. ： 1.200 m
Z ： 2.500 m
1
A：[List]
View
[Find Pt.] 1/50
Coord. Job OK
STN1 Station
200007 Meas. PT
200008 Meas. PT
100 Fix Pt.
偏置模式 : 偏置模式 :
DEFAULT Station
B：Input the name of point
and press [F1] (View) to
view the point whether
exists in the file or not. If
exists, you can call it,
otherwise, you need to
input or measure the
coordinate of the point.
[F1]
(View)
+
[F4]
(OK)
B: Search point
View
[Find Pt.] 1/3
Coord. Job OK
1 Meas. PT
1 Fix Pt.
偏置模式 : 偏置模式 :
1 Station
C：Press [F2] (Coord.) and
input a point name which
not exists in the file.
[F3]
(Coord
)
+
[F4]
C：Input point
Back
[Input Coord.]
OK
Pt. : DEFAULT
N : 0.000 m
E : 0.000 m
Z : 0.000 m
偏置模式 : 偏置模式 :
Job : DEFAULT