HIKVISION DS-2SE4C425MWG-E/26(F0) User Manual

Go to Conguraon → Network → Network Service → Bonjour to enable the funcon, and click
Save.
Aer enabling the funcon, the device spread and receive service informaon in local area
network.
10.12 WebSocket(s)
WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its above
v
ersion or Mozilla Firefox 52 and its above version to visit the device. Otherwise, live view, image
capture, digital zoom, etc. cannot be used.
Go to Conguraon → Ne
twork → Network Service → WebSocket(s) to set parameters, and click
Save.
WebSocket
TCP-based full-duplex communicaon protocol port for plug-in free preview via HTTP protocol.
WebSockets
TCP-based full-duplex communicaon protocol port for plug-in free preview via HTTPS protocol.
10.13 TCP Acceleraon
TCP acceleraon is used to improve latency and reduce packet loss caused by network congeson
in poor network condion, and guarantee the uency of live view.
10.14 Trac Shaping
Trac shaping is used to shape and smooth video data packet before transmission.
It help
s to improve latency and reduce packet loss caused by network congeson and ensure the
video quality as well. Shaping level is congurable.
10.15 Set ISUP
When the device is registered on ISUP plaorm (formerly called Ehome), you can visit and manage
the de
vice, transmit data, and forward alarm informaon over public network.
Steps
1.
Go to Conguraon → Network → Plaorm Access → ISUP .
2.
Oponal: Select an access cen
ter.
3.
Check Enable.
4.
Select a protocol version and enter related parameters.
5.
Click Save.
TandemVu PTZ Camera User Manual
90

HIKVISION DS-2SE4C425MWG-E/26(F0) Specifications

General

Brand	HIKVISION
Model	DS-2SE4C425MWG-E/26(F0)
Category	Security Camera
Language	English