HIKVISION DS-2SE4C425MWG-E/26(F0) - Chapter 11 System and Security; 11.1 View Device Information; 11.2 Restart; 11.3 Upgrade

Chapter 11 System and Security
It introduces system maintenance, system sengs and security management, and explains how to
congure relevant parameters.
11.1 View Device Informaon
You can view device informaon, such as Device No., Model, Serial No. and Firmware Version.
Enter Conguraon → System → System Sengs → Basic Informaon to view the device
informaon.
11.2 Restart
You can restart the device via browser.
Go to Maintenance and Security → Maintenance → Restart , and click Restart.
11.3 Upgrade
Before You Start
You need to obtain the correct upgrade package.
Cauon
DO NOT disconnect power during the process, and the device reboots automacally
aer upgrade.
Steps
1.
Go t
o Maintenance and Security → Maintenance → Upgrade .
2.
Choose one method to upgrade.
Firmware Locate the exact path of the upgrade le.
Firmware Directory Locate the directory which the upgrade le belongs to.
3.
Click
to select the upgrade le.
4.
Click Upgr
ade.
11.4 Restore and Default
Restore and Default helps restore the device parameters to the default sengs.
Steps
1.
Go to Maintenance and Security → Maintenance → Backup and Restore .
TandemVu PTZ Camera User Manual
92