HIKVISION DS-2SE4C425MWG-E/26(F0) - 11.13.10 User and Account

Go to Maintenance and Security → Security → TLS , and enable the desired TLS protocol. Click
Save.
Cauon
Use the funcon with cauon. The security risk of device internal informaon leakage exists when
the funcon is enabled.
11.13.10 User and Account
Set User Account and Permission
The administrator can add, modify, or delete other accounts, and grant dierent permission to
dierent user levels.
Cauon
To increase security of using the device on the network, please change the password of your
acc
ount regularly. Changing the password every 3 months is recommended. If the device is used in
high-risk environment, it is recommended that the password should be changed every month or
week.
Steps
1.
Go t
o Conguraon → System → User Management → User Management .
2.
Click Add. Enter User Name, select Level, and enter Password. Assign remote permission to
users based on needs.
Administrator
The administrator has the authority to all operaons and can add users and operators and
assign permission.
User
User
s can be assigned permission of viewing live video, seng PTZ parameters, and changing
their o
wn passwords, but no permission for other operaons.
Operator
Oper
ators can be assigned all permission except for operaons on the administrator and
creang accounts.
Modify Select a user and click
to change the password and permission.
Delete Select a user and click
.
Note
The administrator can add up to 31 user accounts.
3.
Click OK.
TandemVu PTZ Camera User Manual
103