HIKVISION DS-2SE4C425MWG-E/26(F0) - 3.2.1 Set Camera Info; 3.3 Face Capture; 3.3.1 Set Auto Face Capture Rule

3.2.1 Set Camera Info
Customize specic informaon for the device. It may help idenfy a certain device when mulple
devices are under management.
Go Open Plaorm → General VCA Resource to set Camera No. and Camera Info.
3.3 Face Capture
Face capture funcon detects faces and captures pictures. When the grading of the detected face
exceeds an algorithm-dened value, the device captures the face and triggers linkage acons. Set
up rule and parameters before using the funcon.
Note
●
This funcon is only supported by certain device models.
●
T
o enable this funcon, you may need to select Face Capture on VCA Resource page. See
Allocate VCA Resource f
or details.
3.3.1 Set Auto Face Capture Rule
Aer
seng the face capture rules and algorithm parameters, the device captures faces and
triggers linkage acons
automacally.
Before You Start
Go to VCA → Select Applicaon to select Face Capture, and click Next to enable the funcon.
Steps
1.
Go t
o VCA → Set Applicaon → Face Capture → Rule .
2.
Check Enable.
3.
Select a conguraon mode.
Normal One detecon scene is allowed to set. The device captures face in the scene in set
arming schedule.
See Normal Mode Sengs for details.
Expert The device can patrol among the detecon scenes and capture face images.
Detecon scenes and patrol schedule should be set in advance.
See
Expert Mode Sengs for details.
4.
Click Sa
ve.
What to do next
Go to Playback → Picture to search and view the captured pictures.
Go to Applicaon Display → Smart Displa
y → Display Alarm to see currently captured face
pictures.
TandemVu PTZ Camera User Manual
9