1) Go to VCA → Set Applicaon → Face Recognion → Auto-Switch Schedule and Linkage
Method .
2) Click Modify.
3) Draw me bars as desired.
4)
Click a me bar and click Se
t Scene Auto-switch.
5) Edit patrol path and input dwell me for each detecon scene.
Add Add a detecon scene to the patrol path.
Adjust the order of the scenes.
Delete the detecon scene.
6) Click OK.
5.
Set linkage method. See Linkage Method Sengs .
6.
Click Save.
3.3.2 Operate Manual Face Capture
Capture the target face manually in live view image.
St
eps
1.
Click Live View.
2.
Click
to start manual face capture.
3.
Dr
aw a frame to select the target face in live view image.
The captured picture can be uploaded to the center.
4.
Click the icon again to stop manual face capture.
3.3.3 Overlay and Capture
Choose to congure capture parameters and the informaon you want to display on stream and
pictur
e.
Display VCA Info. on Stream
Display smart informaon on stream, including the target and rules informaon.
Display Target Info. on Alarm Picture
Ov
erlay the alarm picture with target informaon.
Target Picture Sengs
You can set the face picture type by selecng Custom, Head Shot, Half-Body Shot, or Full-Body
Shot. If you select Custom, you can dene detailed picture width and height of a picture freely.
If the captured pictures should have the same picture height, check Fixed Picture Height and
input desired picture height.
TandemVu PTZ Camera User Manual
11
To Next Page
Loading...
Need help?
General
