HIKVISION DS-2SE4C425MWG-E/26(F0) - 11.8 Search and Export Data Aware Information; 11.9 View Open Source Software License; 11.10 Set Live View Connection

Go to Maintenance and Security → Maintenance → Device Debugging → Diagnose Informaon .
Click Export. In the pop-up window, check desired diagnose informaon and click Export to export
corresponding diagnose informaon of the device.
11.8 Search and Export Data Aware Informaon
The data aware funcon is used to search and export the data of the restart, arming and capture
alarm stascs.
Before You Start
Log in to the device via admin user account.
Steps
1.
Go to Applicaon Display → Data Aware .
2.
Select the search condion.
Stascs Type Opons
Restart Records Type of
reboong, start me and end me.
Arming Arming type, start me and end me.
Capture Alarm
Stascs Report type, alarm target, protocol, arming IP address and start
me.
Alarm Quality Stascs Report type, alarm target and start me.
3.
Click Sear
ch.
The data informaon that match the condions will be displayed.
4.
Oponal: Click Export to save the data informaon to the local device.
11.9 View Open Source Soware License
On the top-right corner, click
and select Open Sour
ce Soware Descripon to download the
license. You can view the license in the editor.
11.10 Set Live View Connecon
It controls the remote live view connecon amount.
Liv
e view connecon controls the maximum live view that can be streamed at the same me.
Enter Conguraon → System → System Sengs → System Service to set the upper limit of the
remote connecon number.
TandemVu PTZ Camera User Manual
94