HIKVISION DS-2SE4C425MWG-E/26(F0) - 11.13.1 Set IP Address Filter; 11.13.2 Set MAC Address Filter; 11.13.3 Security Audit Log

Steps
1.
Go to Maintenance and Security → Security → IP Address Filter .
2.
Check Enable.
3.
Select the type of IP address lter.
Blocklist IP addresses in the list cannot access the device.
Allowlist Only IP addresses in the list can access the device.
4.
E
dit the IP address lter list.
Add Add a new IP address or IP address range to the list.
Modify the selected IP address or IP address range in the list.
Delete the selected IP address or IP address range in the list.
5.
Click Sa
ve.
11.13.2 Set MAC Address Filter
MAC address lter is a tool for access control. You can enable the MAC address lter to allow or
forbid the visits from the certain MAC addresses.
Steps
1.
Go to Maintenance and Security → Security → MAC Address Filter .
2.
Check Enable.
3.
Select the type of MAC address lter.
Blocklist MAC addresses in the list cannot access the device.
Allowlist Only MAC addresses in the list can access the device.
4.
E
dit the MAC address lter list.
Add Add a new MAC address to the list.
Modify the selected MAC address in the list.
Delete the selected MAC address in the list.
5.
Click Sa
ve.
11.13.3 Security Audit Log
The security audit logs refer to the security operaon logs. You can search and analyze the security
log les of the device so as to nd out the illegal intrusion and troubleshoot the security events.
Security audit logs c
an be saved on device internal storage. The log will be saved every half hour
aer device
boong. Due to limited storage space, you can also save the logs on a log server.
TandemVu PTZ Camera User Manual
97