Figure 8-5 Draw Area
8.
Click Save.
9.
Oponal: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
10.
Se
t arming schedule. See
Set Arming Schedule .
11.
Se
t linkage method. See
Linkage Method Sengs .
8.2.4 Set Region Exing
Detecon
Region exing detecon is used to detect the objects movement of exing from a predened area.
When it occurs, the device takes linkage acons as response.
Before You Start
Go to VCA → Select Applicaon to select Smart E
vent, and click Next to enable the funcon.
Steps
1.
Go to VCA → Set Applicaon → Smart E
vent → Region Exing Detecon .
2.
Select a channel.
3.
Check Enable.
4.
Oponal: Click Lock to lock PTZ control to prevent the interrupon from other PTZ related acon
during conguraon.
Normally, the PTZ control is automacally locked when you enter the
conguraon interface.
You can manually resume the lock when the countdown is over.
TandemVu PTZ Camera User Manual
69
To Next Page
Loading...
Need help?
General
