HIKVISION DS-2SE4C425MWG-E/26(F0) - Page 82

5.
Adjust the live image to the desired scene by using PTZ control buons.
6.
Oponal: Set the minimum size and the maximum size for the target to improve detecon
accuracy. Only targets whose size are between the maximum size and the minimum size trigger
the detecon.
1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the
buon and draw again.
2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the
buon and draw again.
7.
Set detecon parameters.
Sensivity It stands for the sensivity of detecng an target. The higher the value is,
the mor
e easily the target is detected.
Detecon
Target
You can specify the object type, and the device only detects the selected
type of objects.
Figure 8-6 Draw Area
8.
Click Sa
ve.
9.
Oponal: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
10.
Se
t arming schedule. See
Set Arming Schedule .
11.
Se
t linkage method. See
Linkage Method Sengs .
TandemVu PTZ Camera User Manual
70