HIKVISION DS-2SE4C425MWG-E/26(F0) User Manual

7.3.1 Capture Automacally
This funcon can capture pictures automacally during congured me periods.
Before You Start
If event-triggered capture is required, you should congure related linkage methods in event
sengs. Refer to Event and Alarm for event sengs.
Steps
1.
Go to Conguraon → Storage → Schedule Sengs → Capture .
2.
Set capture schedule. Refer to Set Arming Schedule for conguring schedule me.
Figure 7-1 Set Capture Schedule
3.
Se
t the capture type.
Scheduled
Capture a picture at the congured
me interval.
Event-Triggered
Capture a picture when an event is triggered.
4.
Set the Format, Resoluon, Quality, In
terval, and Capture Number.
Note
The
resoluon of the captured picture is the same as the resoluon of the captured picture
stream. You can select Stream Type in Advanced.
5.
Click Sa
ve.
7.3.2 Capture Manually
Steps
1.
Go to Conguraon → Local .
2.
Set the Image Format and saving path to for snapshots.
JPEG
The picture size of this format is comparavely small, which is beer for network
tr
ansmission.
BMP
TandemVu PTZ Camera User Manual
57

HIKVISION DS-2SE4C425MWG-E/26(F0) Specifications

General

Brand	HIKVISION
Model	DS-2SE4C425MWG-E/26(F0)
Category	Security Camera
Language	English