HIKVISION DS-2SE4C425MWG-E/26(F0) - 4.6 Set Home Position; 4.7 Set Park Action; 4.7.1 Set One-Touch Park

4.6 Set Home Posion
Home posion refers to the relave inial posion of the device azimuth. You can set the home
posion if you need to select one point in the scene as the base point.
St
eps
1.
Go to Conguraon → P
TZ → Home Posion .
2.
Move the device to the needed posion by manually controlling the PTZ control buons.
3.
Click Set to save the informaon of inial posion.
View The device moves to the set inial
posion.
Clear Clear the set inial
posion.
4.7 Set Park Acon
You can set the device to perform an acon (for example, preset or patrol) or return to a posion
aer a period of inacvity (park me).
Before You Start
Set the acon type
rst. For example, if you want to select patrol as park acon, you should set the
patrol. See
Set Patrol Scan f
or details.
Steps
1.
Go to Conguraon → PTZ → Park Acon .
2.
Check Enable Park Acon.
3.
Se
t Park Time: the inacve me before the device starts park acon.
4.
Select Acon Type according to your needs.
5.
Select an Acon Type ID, if you select patrol or preset as acon type.
When the acon type is patrol, acon type ID stands for patrol No. When the acon type is
pr
eset, acon type ID stands for preset No.
6.
Click Save.
4.7.1 Set One-Touch Park
This funcon is used to start park instantly.
St
eps
1.
Refer to Set Park Acon to set a park acon.
2.
Choose from the following methods to start one-touch park.
-
Click .
-
Call Pr
eset No. 32.
TandemVu PTZ Camera User Manual
22